YOKO 20W Cylindrical Surface Mounted Downlight IP44

Architectural surface cylinder designed for concrete ceilings in open-plan apartments, kitchens, and commercial corridors.

The YOKO 20W is a cylindrical surface mounted LED downlight designed for residential and commercial spaces requiring a higher light output without recessed ceiling installation. Its direct mounting design makes it suitable for concrete slabs and solid ceilings where a ceiling cut-out or recessed cavity is not available. The clean cylindrical form and black or white finish provide a simple architectural appearance across a range of interior settings. A high-reflectivity specular reflector directs light downwards through a 60 deg beam, providing balanced illumination with UGR less than 19 for reduced glare and improved visual comfort. The 20W output is suitable for living rooms, kitchens, open-plan apartments and commercial corridors, particularly where a stronger level of illumination is required. The recommended ceiling height is approximately 2.7m to 3.2m. Dimming options are available subject to the selected configuration.

BLSM-YOKO-20

Superior Colour Accuracy (CRI 92)

Superior Colour Accuracy (CRI 92)

3 Year Warranty

3 Year Warranty

R&D Lab Designed and Tested

R&D Lab Designed and Tested

Flicker-Free /High-Quality Driver

Flicker-Free /High-Quality Driver

Specifications

PRODUCT CODE

BLSM-YOKO-20

POWER (W)

20

LUMINOUS FLUX (LM)

2000

INPUT VOLTAGE (V)

AC 200-240

CONNECT

Insulated Cable

CCT

Warm White, Neutral White, Cool White (3000K-6000K)

CRI

>80 or 92

VIEWING ANGLE

60

DIMMING

Various Dimming Options Available on Request

IP RATING

IP44 from below

DIMENSIONS (MM)

D133*H153

CUT OUT (MM)

Not required

WEIGHT (KG)

0.7

LIFETIME (HRS)

35,000 @ L90 B10

WARRANTY

3

FITTING COLOUR

White or Black





Frequently Asked Questions About This Downlight

Q: When should I choose a surface-mounted downlight over a recessed downlight?

A: Choose a surface-mounted downlight when the ceiling can't be cut or there isn't enough ceiling void for a recessed fitting. Typical cases include concrete slabs, exposed timber beams, low ceiling voids and retrofits where the existing ceiling should stay untouched. The fitting mounts directly on the ceiling face, so no cut-out is required.

Q: Can surface mounted downlights be used on low ceilings?

A: Yes, because they don't need any ceiling void. They do sit proud of the ceiling, so check the fitting depth against the ceiling height, particularly above doorways and walkways.

Need Help Specifying This Surface Mounted Downlight?

Send us your plans or project requirements and our lighting team will help you choose the right beam angle, colour temperature, CRI and control option for the application. For project pricing, technical specifications or stock availability, email quotes@boscolighting.com.au or call  02 9188 3470 during business hours.

Request a Quote